RSS Feed
Knowledgebase : Audio Networking > ACE
If you find you can access only channels 1-32 and 33-64 are missing, make sure the Slave iLive Port B ACE Redundant Link option is turned ON. To do this go to the Surface MIXRACK SETUP / Mixer Pref / Port A/B Setup screen, or Editor Setup / Mixer P...
Q: With iLive modular, and V1.61 firmware, when connecting two MixRacks together for Dual-MixRack function, do the Network Bridge jumpers need to be connected with ACE & Network in each of the MixRacks? Would seem that ACE would need the control func...
The following are ME-1 system latency measurements using 'input direct out' as the source and the 'Monitors' output on GLD. GLD / dSNAKE: AR2412 Input to ME-1 Output: 1.21 ms GLD / Aviom mode: AR2412 Input to ME-1 Output: 1.21 ms iLi...
'Dual-Rack' is a special setup mode for two iDR MixRacks. It is to expand the number of input channels of an iLive system from 64 channels to 128, mixing to 32 mixes. Any two MixRacks from the iDR family can be combined in this way, the system can then...
The MixRack to Surface link in iLive is always 64 channels bi-directional capability. For this connection you can use currently : A) ES (EtherSound) [1] B) ACE [2] C) MADI [3] The iLive system 'reserves' channels 1-32 in this audio bridge for inpu...
Q: Can I connect to other audio protocols? A: Yes. * Direct connection to GLD dSNAKE [1] * Direct connection to iLive ACE [2] * Direct connection to AviomĀ® A-Net 16 * Connect to other networks via ME-U hub [3]: 48kHz Dante [4] MADI [...
Q: Our customer uses 2 iLive systems with 2 MixRacks and 2 consoles in FoH+Monitor mode. He is going to use ME-1 system [1]. So is it possible to connect in this system ME-1? If yes - then how? A: If he is using 2 iLives in FOHMONS then probably he ...
This setup has been tested by Customer Services. 2x TP-Link MC-100CM Fast Ethernet Media Converter (SC, Multi-mode) 2x Videk 3182-1 adapter cable (SC to LC, duplex, multimode) 2x Neutrik NO2-4FDW (OpticalCON DUO chassis connector with LC-duplex socket...
Layer 2 network switches and media converters can be used, provided they support Fast Ethernet (100Base-TX) connections (ACE and dSNAKE are Ethernet 802.3 IEEE [http://en.wikipedia.org/wiki/IEEE_802.3] Layer 2 compliant) Typical applications include par...