RPSD2. RPSD. DUAL SUPPLY COMBINER / MONITOR
Posted by , Last modified by on 23 May 2013 02:15 PM


RPSD Combiner for two 5 pin MPS / RPS PSUs
RPSD2 Combiner and conditioner for two RPS11 10 pin PSUs


This is a discontinued product, the User Guide is available in the Old Products section of our website
HOME > PRODUCTS > DISCONTINUED > RPSD/RSPD2



Although the RPSD is primarily intended to operate with the GL4 range of consoles
and the RPSD2 is intended to operate  with  the GL4000 range,  


Both are capable of operating with the entire  range of A&H G-Series consoles, 

provided the correct interconnecting cables are used. (see accessories in Specification section). 


The RPSD2 & RPSD have been designed to operate with the following range of A&H power supplies: 


MPS8

MPS9

RPSSB
RPS9
RPS10
RPS11


RPSD   was supplied with 1 X cable : 002-060 - now discontinued
RPSD-2 was supplied with 1 X cable : 002-223
RPSD-2 combiner was supplied with 1 X cable : 002-223 &  1 X cable : 002-225 


Please  note,  
that  when  connecting the  RPS11 to an RPSD

a special interconnecting cable will be required.
A&H part no:
002-225 (CABLE ASSY DC RPS11 10-5P M-F)

 

For any further information / support please contact your local A&H distributor



keywords: redundant backup psu rpds-2