Knowledgebase: Xone Series > Xone:92
Xone:92-R. Xone:S2-R. Rotary Faders
Posted by , Last modified by on 09 May 2013 04:11 PM

The knob caps for the rotary faders are not push fit but secured with a collet, washer and nut.

They are the same parts as used for the Wet/Dry Control knobs on the Xone:DB2 and Xone:DB4
If you need to remove, tighten or adjust, please see this related knowledgebase article with attached photos

If you need further information please contact your local Allen & Heath distributor


keywords: xone92rotary xone92-rotary x92r xones2rotary xones2-rotary xs2r