ICE Series. USB connected - 'SLo' displayed
Posted by , Last modified by on 18 January 2013 03:13 PM
This is short for "Slow" and is explained in the User Guide
available to download from the A&H website
Formatting USB Memory
ICE-16 will check the USB memory device each time it is connected.
Previously formatted devices will not be tested, and any recorded songs will be displayed numerically.
If the memory device is new and unformatted, ICE-16 will test it and display either the resolution mode Hi or Lo depending on the test result,
or display 'SLo' if the memory device does not have sufficient speed to cope with the data rate with the memory format.
This may well be because the cluster size is set to 4, 8 or 16kbytes. It needs to be 32kbytes.
Formatting the USB memory on the ICE-16 will correct this.
So if the initial test results in 'Slo' being displayed
try formatting the memory to reset the cluster size and re-test the memory speed.
keywords: ice-16 ice16 ice16D ice-16D 510 s10 sl0 sl0 slow