GLD-80. Turn on phantom power?
Posted by Al Crombie, Last modified by on 28 September 2012 03:07 PM

Q:
How do you turn on phantom power?


A:
Phantom Power is enabled on a per-channel basis, via the corresponding channel PROCESSING screen, as follows;

1. Press the 'PROCESSING' button to the right of the touchscreen to open the Channel & Processing Mix view on screen
2. Press the green 'SEL' button on the channel strip of the required input
3. Touch the 'PREAMP' tab at the top of the PROCESSING screen
3. Touch & HOLD the '48V(HOLD)' tab to enable Phantom Power on the selected channel
4. Repeat above on each channel, as required.

 

 

KEYWORDS: GLD80 / GLD-080 GLD112 GLD-112  / PP / 48V / PHANTOM POWER / CONDENSOR MIC pre-amp