Knowledgebase: iLive > iLive Editor
iLive. Linking two systems for FOH/Monitor using ACE, Only channels 1-32 visible
Posted by Carey Davies, Last modified by on 12 April 2011 06:10 PM

If you find you can access only channels 1-32 and 33-64 are missing,
make sure the Slave iLive Port B ACE Redundant Link option is turned ON.

To do this go to the Surface MIXRACK SETUP / Mixer Pref / Port A/B Setup screen,
or Editor Setup / Mixer Preferences menu.

This ensures that all 64 channels are available at the ACE sockets.
If Redundant Link is turned OFF then ACE Link 1 receives channels 1-32 and Link 2 receives channels 33-64.
This setting is used when connecting two xDR-16 expanders.