Knowledgebase: iDR Series > iDR - General
iDR-4. iDR-8. Offline Telnet Session Set Up
Posted by Chris Panks, Last modified by on 28 March 2011 01:06 PM

How to set up an offline Telnet session:

1. Start an offline System Manager session (i.e. connect to an offline iDR-8 or iDR-4).

2. From the Start Menu select Run...

3. In the box type CMD

4. From the DOS prompt type TELNET

5. From the Microsoft Telnet> prompt, type OPEN 127.0.0.1
     (this can also be the IP address of an iDR unit on a physical network).

The screen should blank and you should get the message below:
CONNECTED TO IDR
iDR4>   (if you are connected to an offline iDR-8 you will see iDR8>)

6. You can now use any of valid TelNet commands. Examples below:
GET PRESET
SET IPGAIN 1 -59.0
GET OPGAIN 16
SET IPMUTE 7 ON
GET OPMUTE 4

etc.




keywords: iDR4 iDR8 Setup