Knowledgebase: iDR Series > iDR - General
iDR-4. iDR-8. Rackmounting problems?
Posted by - NA -, Last modified by on 08 July 2009 11:17 AM

The internal requirements of the iDR-8 and iDR-4 series mixers mean that the
maximum available dimensions of the DIN 41494 Part 1 (IEC 297-1 2nd edition) standard are required.

Correspondingly some 19" racks which do not conform to
DIN 41494 Part 1 may have difficulties accepting an iDR4/8 unit. 

However, with a rack conforming to the DIN 41494 Part 1 (IEC 297-1 2nd edition), there should not be a problem.

If you encounter problems with the fitting of our product into 19" racking we suspect that the racking is not to tolerance.
You should able to verify this by measuring the clearance between the internal faces of the mounting flanges on your rack are minimum 450mm apart.


keywords: iDR4 iDR8 rack mounting