Knowledgebase: SQ Series
Working with the Library
Posted by Alex Skinner, Last modified by Alex Skinner on 13 February 2018 04:26 PM

The ability to save and recall specific settings is available on certain processing blocks on the input and output channels, and FX racks. This is stored in the Library under the User tab and the following settings can be stored and recalled:

  • Input Channel
  • Gate
  • PEQ
  • Compressor
  • Mix Channel
  • GEQ
  • FX

To store a new channel library setting:

  • Press the Sel key of a channel and press the Processing key
  • Select one of the above processing blocks in the channel view
  • Press the Library key located to the top left of the screen to view the Library page
  • Select the User tab and ‘Store New’ key
  • Insert a name for the settings, ‘Kick Drum’ for example and press OK

To Store a new FX library setting:

  • Press the FX key under the screen
  • Select a FX rack block
  • Press the Library key located to the top left of the screen to view the Library page
  • Select the User tab and ‘Store New’ key
  • Insert a name for the setting, ‘Vocal Reverb’ for example and press OK

To Recall a library setting:

  • Navigate to an FX or processing block Library page
  • Select a name from the list of settings on the left side of the page
  • Press Recall
  • Exit the Library view

To Overwrite a library setting:

  • Adjust the settings for the FX block or processing block to your preference
  • Navigate to an FX or processing block Library page
  • Select the User tab
  • Select a name from the list of settings on the left side of the page
  • Press Overwrite
  • Exit the Library view

To Delete a library setting

  • Navigate to an FX or processing block Library page
  • Select a name from the list of settings on the left side of the page
  • Press Delete
  • Exit the Library view