Knowledgebase: dLive
dLive MixRack hard reset
Posted by Jack Kenyon, Last modified by Jack Kenyon on 20 April 2017 10:42 AM

In some cases it's useful to do a full factory reset of the MixRack.

This is done by accessing a set of 4 DIP switches, inside the I/O port on the C Class, or inside Power 2 on the S Class (see photos)

  • Reset occurs with switch in ON position and rack powered on for 10 seconds.
  • After 10 secs turn off rack and move switches back to OFF position.
  • Switches should be left in OFF position for normal operation

Switch 1 – Reset Current Settings - not network or scenes
Switch 2 – Password Reset
Switch 3 – No Function – keep OFF
Switch 4 – Debug – Do not use - keep OFF

Comments (0)