dLive MixRack hard reset
Posted by Jack Kenyon, Last modified by Martijn Verkerk on 30 July 2018 03:03 PM
|
|
In some cases it's useful to do a full factory reset of the MixRack. This is done by accessing a set of 4 DIP switches, inside the I/O port on the C Class, or inside Power 2 on the S Class (see photos)
Switch 1 – Reset Current Settings - not network or scenes Switch 2 – keep OFF Switch 3 – keep OFF Switch 4 – keep OFF ![]() ![]() | |
|