Knowledgebase:
Qu & Outboard Gear
Posted by Mike Davey, Last modified by Harry Garcia on 09 November 2016 04:26 PM

The Qu range of Allen & Heath mixers do not have dedicated send and returns for external hardware.

As a workaround you can do the following:

  1. Send audio from your DAW to Qu's input channel/s.
  2. Send audio from the input channel above to a Mix Output (Mix 1, 2, 3, 4, 5-6 etc).
  3. Connect the Mix Output to the input/s of your outboard gear.
  4. Connect the return from your processor to a new input channel/s on Qu.