Knowledgebase: PL Series
PL TERMINATOR
Posted by Maf Prigg, Last modified by Maf Prigg on 07 July 2014 10:37 AM

End of chain termination.

As with any RS485 system, the last PL device needs to have a terminating resistor fitted to its output port.
Early version PL-3 modules are shipped with a 100 ohm resistor already fitted.

Leave this fitted only if the unit is the last in the chain.
Later version PL-3 modules are supplied with a terminating RJ45 plug (Allen & Heath part number 003-082).

 

 

 

 

PL TERMINATOR RJ45, RS485 
PL-3, PL-4, PL-6, PL-7, PL-7/3, PL-7/4, PL-8, PL-10, PL-11,
PL3, PL4, PL6, PL7, PL7/3, PL7/4, PL73, PL74, PL8, PL10, PL11,



Attachments 
 
 003-082 plug assy rj45 terminator.jpg (35.46 KB)